2.4GHZ DONGLE PAIRING GUIDE: DAYBREAK/MIDNIGHT HEADSETS

In this guide, we will go over go over the process of pairing the Daybreak and Midnight Wireless Gaming Headsets to the 2.4GHz USB-C dongle.



  1. Begin by making sure the included USB-C dongle for your headset is not plugged into any device and readily available for use. Place the headset in 2.4 GHz mode as indicated by the image below.




  1. Next, with the headset turned off, press and hold the power button until the headset powers on and the blue LED light begins to flash rapidly.




  1. From here, plug in the headset's USB-C dongle into the device you wish to connect to, and wait 3 seconds.


  1. After waiting, unplug the USB-C dongle and wait 2 seconds.


  1. Repeat steps 3-4 once more, then plug in the USB-C dongle one final time. You should hear a quick tone that indicates the connection was successful




If you do not see the device connected afterwards, turn off the headset and repeat this process.




Need help? Contact JLab Support: support@jlab.com or 1-405-445-7219.