2.4GHz Dongle Pairing Guide: Epic Lab Edition

If you are trying to pair your Epic Lab Edition with a 2.4GHz dongle, this guide will help. Follow along the steps below, and you will be re-paired in no time!

 

• Begin by placing both earbuds into the charging case.

 

• Tap the first earbud 7 times so that you see the LED blink blue 4 times.

• Repeat this 7 tap process with the second earbud (order does not matter).

 

• Take both of the earbuds out of the case.
• On one of the earbuds, tap the touch sensor 5 times (the LED will blink blue rapidly).

 

• Plug the 2.4GHz dongle into your USB-C device (1st time), wait 2 seconds, unplug, and wait 2 seconds.

 

• Plug the dongle into your device (2nd time), wait 2 seconds, unplug, and wait 2 seconds.
• Finally, plug the dongle into your device and the earbuds will automatically connect (blue LED will turn off).

 

 

 

 

 

 

As always, if you need any further assistance with your product and this process, our support team is happy to help: support@jlab.com or 1-405-445-7219