2.4GHz Dongle Pairing Guide: Nightfall Wireless

This guide will walk you through pairing your Nightfall Wireless headset with a JLab 2.4GHz Nightfall-specific dongle. Before you begin, it's important that the headset is not connected to any other dongle.

 

  • Hold the multifunction button for 3 seconds to turn the headset on.

 

       

 

  • Begin by sliding the connection switch to the 2.4 mode (green switch background).

 

                 

  • Press the same multifunction button a total of 5 times quickly.

 

  • This will put the headset into dongle pairing (indicated by the blinking blue light next to the charging port).

 

                 

  •  Plug the dongle into your desired USB port and the blue light will turn off on your Nightfall, showing that the pairing was successful!

 

             

 

As always, if you need any further assistance with your JLab product, our support team is happy to help: support@jlab.com or 1-405-445-7219