Feature Overview: JBuds Open Headphones

The JBuds Open Headphone takes an exciting twist on open audio, providing you the comfort of over-ear headphones mixed with total environmental awareness.

 

Device Setup

  • Charge your JBuds Open headphones using the USB-C input on the right earcup.

Connectivity

  • Press and hold the power button for 8 seconds to put the JBuds Open Headphone in Bluetooth pairing mode, then simply pair in your phone, tablet, or laptop's Bluetooth settings.


  • To use the headphones wired, begin by making sure they are powered off. Plug the USB-C data cable into this same USB-C port on the right earcup, and connect the other end to your phone or computer. Use this for a low-latency, crystal clear audio setup!



    Bluetooth Multipoint Connection

    A multipoint connection allows the JBuds Open Headphones to stay connected with two devices simultaneously. Audio will seamlessly switch when media is played on either device.

    • Pair your headphones with your first device.
    • Turn off Bluetooth on that device.

     

    • Pair the headphones with your second device.

       

      • Re-enable Bluetooth on the first device, and tap on its pairing record.

       

      Now your headphones can automatically switch audio between devices without having to do it manually.





      Fit and Style

      The grille covers can be removed to let you decide on the headphones' style.

      • Firmly hold the earcup and twist the ear cushions counter-clockwise.
      • The metal backplate can now be pushed out and removed from the headphone.
      • To re-assemble, line up the headphone and earcup's notches and firmly twist clockwise to lock them together.

       

      • To find the optimal position for the dual-drivers, move the headphones back until you feel them touching your ears, now adjust them forward slightly so the drivers do not contact your ears.

       

       

       

      On-Ear Controls

      • The volume buttons allow you to raise or lower your media volume with a single press, restart or skip your track by holding for 2 seconds, and change the EQ by simultaneously holding both buttons for 1 second.

        • The power button lets you play/pause media with 1 press, activate your voice assistant with 2 presses, and go into LabShare with 5 presses.
        • While receiving a call, press once to answer and hold for 2 seconds to reject, while the call is active you can use press once to end the call.



            JLab App Customization

            Take full control of your listening experience with the JLab App, available on the Play Store and App Store:

            • Adjust EQ settings for deep bass, balanced audio, or crystal-clear treble.

            • Customize the button controls to a wide variety of functions, including interval timer controls.
            • The Interval timer allows you to set custom active and rest sessions, all activated through your headphone buttons!

             

            • Activate spatial audio for a 3D sound stage, choose to disable voice prompts, use the low-latency Movie Mode, and set a listening limit to protect your hearing.

            • The Bluetooth Connections tab allows you to switch between your previously connected devices, and quickly enter pairing mode with your headphones.

             


             

            Need help? Contact JLab Support: support@jlab.com or 1-405-445-7219.