How to use the Midnight Wireless Headset


The Midnight Wireless provides strong passive noise cancellation and booming bass with its 50mm drivers. 

Device Setup

  •  Before first use, be sure to charge your Midnight Wireless using the USB-C input on the right earcup.


Connectivity

  •  Use the USB-C dongle with your PC or Console for a high-quality and low-latency audio connection.
    • Make sure the headset's connection switch is in the Green (top) position to connect with the 2.4 GHz stream only.
    • Simply plug the dongle into your computer, and hold the power button for 3 seconds to turn on your headset.

  •  Pair via Bluetooth to your phone or tablet for a stable and long-range connection.
    •  Place the connection switch in the Blue (bottom) position to connect over Bluetooth only, and hold the power button for 3 seconds to turn on your headset.
    • Tap on "JLab Midnight Wireless" in your device's Bluetooth settings to pair.
    • While in the Bluetooth only mode, you can also establish a Multipoint connection with 2 separate Bluetooth devices.

  • Use Dual Stream to simultaneously receive audio from 2 separate devices.
    • Once you have Bluetooth and Dongle connections established, move the connection switch to the Mixed (middle) position to activate Dual Stream.
    • Rotating the volume wheel up will increase output from both sources.
    • Press and hold the volume wheel in while rotating up or down to balance the output between sources.

  •  The Midnight Headset can also be connected with 3.5mm aux while powered, so you can still use all of your same EQs, ENC effects, and button assignments.
    •  Plug the 3.5mm aux cable into the right earcup, then into your console or PC.
    • Hold the power button for 3 seconds to turn on your headset to establish the connection.


 Comfort and Personalization


    • The headband can be moved up or down the posts to adjust for your head size.
      • Three independent adjustment levels for the left and right, gives you a total of 6 height combinations to try.

    • Take the headband off the posts to swap which pattern is displayed.

    • The boom mic can be removed while not in use, and you can still take calls using the onboard headset microphone. 

      • Pull the mic straight down to remove.
      • Make sure to line up the key facing the earcup, then insert the mic into the headset.
      
     

    Mic Controls

    • Adjust the headset's Mic Level to achieve the perfect input volume on any device.
    • Tune the Voice EQ to make your voice sound optimal.
    • Set the perfect Hear Yourself level for a natural talking experience.


    On-Ear Controls

    •  Default controls are shown below, but you can also customize headset buttons with a variety of commands in The Lab app.


    Sound EQs

    •  Adjust the Custom EQ sliders to achieve the perfect sound, or quickly change between the presets for Gaming and Music.




    Need help? Contact JLab Support: support@jlab.com or 1-405-445-7219.