Back to Epic Party Support Page

Feature Overview: Epic Party

Bring the party anywhere with over 100 watts of continuous power from the Epic Party Bluetooth speaker. Achieve fully customizable lighting, sound modes, and LabSync audio sharing with additional JLab Party speakers.

Device Setup

  • To pair with your device, hold the power button for about 8 seconds.

Epic Party power button pairing

  • The LED will flash red and blue to indicate pairing mode. Enter your device's Bluetooth settings to connect.

Epic Party pairing LED

  • Press the volume wheel to play and pause media, use the track forward and back arrows, press the lighting button to cycle through LED animations or hold to turn lighting off, and press the EQ change button to cycle preset and custom sound profiles.

Epic Party controls overview

  • To charge the Epic Party, remove the gasket and plug in the included 30W charger to the USB-C on the right side.
    • Make sure to properly secure the gasket after charging to keep out water and dust.

Epic Party USB-C charging

  • Charge your phone or other devices with the USB-C out, located left of the USB-C in.
  • Use the 3.5mm aux input for a wired audio connection.
  • Plug in a 1/4 inch input (karaoke microphone, electric guitar, etc.) to use alongside Bluetooth audio.
    • While Bluetooth audio is paused, use the volume wheel to adjust gain for your 1/4 inch input device.

LabSync

Epic Party LabSync overview

Cast mode is for the speaker connected to your device and casting media to your LabSync group.

  • The Epic Party should be actively connected with your device's Bluetooth.
  • Hold the Sync button for 2 seconds to enter Cast mode.

Epic Party Cast mode

Receive mode is for other speakers in your LabSync group.

  • Hold the power button to enter pairing mode with your Epic Party.
  • Hold the Sync button for 2 seconds to enter Receive mode.

Epic Party Receive mode

App Features

With the JLab app for iOS and Android, you can customize the Epic Party to fit your preferences.

  • In the Lighting tab you can cycle between 6 animations, adjust each color, change animation speed, and adjust LED brightness.

JLab app Lighting tab

  • Choose between 3 preset EQs, or fine-tune your sound with Custom EQ.

JLab app EQ settings

  • The LabSync tab lets you assign left or right speaker channels and choose whether to sync volume and lighting between connected speakers.

JLab app LabSync tab

  • Toggle the switch to turn off voice prompts, or use the Battery Saver tab to get the most playtime out of the Epic Party.
    • Set the speaker to auto power off after a certain time, or choose to turn off lighting when the battery reaches a certain percentage.

JLab app Battery Saver settings

Need help? Contact JLab Support: support@jlab.com or 1-405-445-7219.