Back to Go Party Support Page

Feature Overview: GO Party

Achieve fully customizable lighting, sound modes, and LabSync audio sharing with additional JLab Party speakers.

Device Setup

  • To pair with your device, hold the power button for about 8 seconds.

GO Party power button pairing

  • The LED will flash red and blue to indicate pairing mode. Enter your device's Bluetooth settings to connect.

GO Party pairing LED

  • Press the volume wheel to play and pause media, use the track forward and back arrows, press the power button to cycle through LED animations, and hold track forward and back to cycle preset and custom sound profiles.

GO Party controls overview

  • To charge the GO Party, remove the gasket above the strap and plug in your USB-C cable.
    • Make sure to properly secure the gasket after charging to keep out water and dust.

GO Party USB-C charging

LabSync

GO Party LabSync overview

Cast mode is for the speaker connected to your device and casting media to your LabSync group.

  • The GO Party should be actively connected with your device's Bluetooth.
  • Hold the volume wheel for 2 seconds to enter Cast mode.

GO Party Cast mode

Receive mode is for other JLab Party speakers in your LabSync group.

  • Hold the power button to enter pairing mode with your GO Party.
  • Hold the volume wheel for 2 seconds to enter Receive mode.

GO Party Receive mode

App Features

With the JLab app for iOS and Android, you can customize the GO Party to fit your preferences.

  • In the Lighting tab you can cycle between 6 animations, adjust each color, change animation speed, and adjust LED brightness.

JLab app Lighting tab

  • Choose between 3 preset EQs, or fine-tune your sound with Custom EQ.

JLab app EQ settings

  • The LabSync tab lets you assign left or right speaker channels and choose whether to sync volume and lighting between connected speakers.

JLab app LabSync tab

  • Toggle the switch to turn off voice prompts, or use the Battery Saver tab to get the most playtime out of the GO Party.
    • Set the speaker to auto power off after a certain time, or choose to turn off lighting when the battery reaches a certain percentage.

JLab app Battery Saver settings

Need help? Contact JLab Support: support@jlab.com or 1-405-445-7219.