Feature Overview: JBuds Party
Achieve fully customizable lighting, sound modes, and LabSync audio sharing with additional JLab Party speakers.
Device Setup
- To pair with your device, hold the power button for about 8 seconds.
- The LED will flash red and blue to indicate it is in pairing mode. Enter your device's Bluetooth settings to connect.
- Press the volume wheel to play and pause media, use the track forward and back arrows for your media, press the power button to cycle through LED animations, and press the EQ change button to cycle preset and custom sound profiles.
- To charge the JBuds Party, remove the gasket and plug in using the included 20W USB-C cable.
- Make sure to properly secure the gasket after charging to keep out water and dust.
LabSync
- Using LabSync with your JBuds Party allows you to wirelessly share audio with any other JLab Party speakers. See How to Use LabSync With JLab Party Speakers for full setup steps.
Cast mode is for the speaker connected to your device and casting media to your LabSync group.
- To start Cast mode, the JBuds Party should be actively connected with your device's Bluetooth.
- Hold the volume wheel for 2 seconds to enter Cast mode.
Receive mode is for other JLab Party speakers in your LabSync group.
- To start Receive mode, hold the power button to enter pairing mode with your JBuds Party.
- Hold the volume wheel for 2 seconds to enter Receive mode.
App Features
With the JLab app for iOS and Android, you can customize the JBuds Party to fit your preferences.
- In the Lighting tab you can cycle between 6 animations, adjust each color, change animation speed, and adjust LED brightness.
- Choose between 3 preset EQs, or fine-tune your sound with Custom EQ.
- The LabSync tab lets you assign left or right speaker channels and choose whether to sync volume and lighting between connected speakers.
- Toggle the switch to turn off voice prompts, or use the Battery Saver tab to get the most playtime out of the JBuds Party.
- Set the speaker to auto power off after a certain time, or choose to turn off lighting when the battery reaches a certain percentage.
Need help? Contact JLab Support: support@jlab.com or 1-405-445-7219.